Olá galera.

Estou criando um projeto de automação residêncial, com ethenet shield v1.1, com poucas lampadas ele funciona mas a medida que aumento o tamanho do código ele carrega mas nao abre e depois da falha.

Alguém sabe um modo de otimizar esse código?

[code]

#include "etherShield.h"
#include "ETHER_28J60.h"

int PinoLed7 = 7;
int PinoLed6 = 6;
int PinoLed5 = 5;
int PinoLed4 = 4;
int PinoLed3 = 3;
int PinoLed2 = 2;
static uint8_t mac[6] = {0x54, 0x55, 0x58, 0x10, 0x00, 0x24};   
static uint8_t ip[4] = {10,0,0,7};  

static uint16_t port = 80;                                  

ETHER_28J60 ethernet;

void setup()
{
  ethernet.setup(mac, ip, port);
  pinMode(PinoLed7, OUTPUT);
  pinMode(PinoLed6, OUTPUT);
  pinMode(PinoLed5, OUTPUT);
  pinMode(PinoLed4, OUTPUT);
  pinMode(PinoLed3, OUTPUT);
  pinMode(PinoLed2, OUTPUT);
 
}

void loop()
{
  char* params;

  if (params = ethernet.serviceRequest())
  {
    ethernet.print("<h1><a href='http://localhost/TCC/Principal.php'>Arduino Web Remote</a></h1>");
    //pino7
    
    if (strcmp(params, "?led1=on")== 0)
    {
      digitalWrite(PinoLed7,LOW);
     
      ethernet.print("<a href='?led1=off'><button style='border: 1px solid #ff0000; border-left: 10px solid #ff0000' type='button'>LED IS ON</button></a>");
      }
      else if (strcmp(params,"?led1=off") == 0)
    {
     digitalWrite(PinoLed7, HIGH);
     ethernet.print("<a href='?led1=on'><button style='border: 1px solid #000; border-left: 10px solid #000' type='button'>LED IS OFF</button></a>");
    }
    
    //pino 6
      if (strcmp(params, "?led6=on")== 0)
    {
      digitalWrite(PinoLed6,LOW);
     
      ethernet.print("<a href='?led6=off'><button style='border: 1px solid #ff0000; border-left: 10px solid #ff0000' type='button'>LED IS ON</button></a>");
      }
      else if (strcmp(params,"?led6=off") == 0)
    {
     digitalWrite(PinoLed6, HIGH);
     ethernet.print("<a href='?led6=on'><button style='border: 1px solid #000; border-left: 10px solid #000' type='button'>LED IS OFF</button></a>");
    }
    //PINO 5
     if (strcmp(params, "?led5=on")== 0)
    {
      digitalWrite(PinoLed5,LOW);
     
      ethernet.print("<a href='?led5=off'><button style='border: 1px solid #ff0000; border-left: 10px solid #ff0000' type='button'>LED IS ON</button></a>");
      }
      else if (strcmp(params,"?led5=off") == 0)
    {
     digitalWrite(PinoLed5, HIGH);
     ethernet.print("<a href='?led5=on'><button style='border: 1px solid #000; border-left: 10px solid #000' type='button'>LED IS OFF</button></a>");
    }
    
    // PINO 4
     if (strcmp(params, "?led4=on")== 0)
    {
      digitalWrite(PinoLed4,LOW);
     
      ethernet.print("<a href='?led4=off'><button style='border: 1px solid #ff0000; border-left: 10px solid #ff0000' type='button'>LED IS ON</button></a>");
      }
      else if (strcmp(params,"?led4=off") == 0)
    {
     digitalWrite(PinoLed4, HIGH);
     ethernet.print("<a href='?led4=on'><button style='border: 1px solid #000; border-left: 10px solid #000' type='button'>LED IS OFF</button></a>");
    }
    
   //PINO 3
    if (strcmp(params, "?led3=on")== 0)
    {
      digitalWrite(PinoLed3,LOW);
     
      ethernet.print("<a href='?led3=off'><button style='border: 1px solid #ff0000; border-left: 10px solid #ff0000' type='button'>LED IS ON</button></a>");
      }
      else if (strcmp(params,"?led3=off") == 0)
    {
     digitalWrite(PinoLed3, HIGH);
     ethernet.print("<a href='?led3=on'><button style='border: 1px solid #000; border-left: 10px solid #000' type='button'>LED IS OFF</button></a>");
    }
    
    //PINO 2
     if (strcmp(params, "?led2=on")== 0)
    {
      digitalWrite(PinoLed2,LOW);
     
      ethernet.print("<a href='?led2=off'><button style='border: 1px solid #ff0000; border-left: 10px solid #ff0000' type='button'>LED IS ON</button></a>");
      }
      else if (strcmp(params,"?led2=off") == 0)
    {
     digitalWrite(PinoLed2, HIGH);
     ethernet.print("<a href='?led2=on'><button style='border: 1px solid #000; border-left: 10px solid #000' type='button'>LED IS OFF</button></a>");
    }
   
    ethernet.respond();
  }
  }

[\code]